View VISHAYROEDERSTEIN-F17734152004_7370573.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

f1773-2000 www.vishay.com vishay roederstein revision: 16-jul-12 1 document number: 26507 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 suppression film capacitors class x2 ac 253 v (mkt) - axial type features ? supplied loose in box, taped on reel or ammopack ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications high stabililty grade for continuous across the line x2 applications. see also application note: www.vishay.com/doc?28153 note ? for more detailed data and test requirements, contact rfi@vishay.com quick reference data capacitance range (e12 se ries) 0.01 f x2 to 2.2 f x2 (p referred values according to e6) capacitance tolerance 0.01 f to ? 0.1 f: 20 % 0.12 f to ? 2.2 f: 10 % rated ac voltage 253 v ac ; 50 hz to 60 hz permissible dc voltage 630 v dc climatic testing class (according to iec 60068-1) c ? 1.0 f = 40/100/21/c c > 1.0 f = 40/085/21/c maximum applicatio n temperature 100 c leads tinned wire reference standards iec 60384-14 ed-3 and en 60384-14, ul 1283, csa dielectric polyester film electrodes metallized construction series construction encapsulation plastic, epoxy resin sealed, flame retardant ul-class 94 v-0 marking c-value; tolerance; rated voltage; sub-class; manufacturers type; code for dielectric material; manufacturer location; manufacturers logo; year and week; safety approvals dimensions in millimeters lead diameter d t d 0.7 0.07 ? 7 0.8 0.08 > 7 to < 16.5 1.0 0.1 ? 16.5 ? d t 40 5 40 5 l max. d max.
f1773-2000 www.vishay.com vishay roederstein revision: 16-jul-12 2 document number: 26507 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 composition of catalog number note ? for detailed tape specifications refer to packaging information www.vishay.com/doc?28139 or end of catalog specific reference data description value rated ac voltage (u rac ) 253 v permissible dc voltage (u rdc ) 630 v tangent of loss angle ? 100 x 10 -4 at 1 khz rated voltage pulse slope (du/dt) r at 350 v dc l 19 mm 200 v/s l 26.5 mm 150 v/s l 31.5 mm 100 v/s l 41.5 mm 100 v/s r between leads, for c ? 0.33 f at 100 v; 1 min ?? 15 000 m ? rc between leads, for c > 0.33 f at 100 v; 1 min > 5000 s r between leads and case; 100 v; 1 min ?? 30 000 m ? withstanding (ac) vo ltage between leads and cover 2000 v; - 1 min withstanding (dc) voltage (cut off curren t 10 ma); rise time 100 v/s 1200 v; 1 min maximum application temperature 100 c example: 468 = 680 nf 0.1 2 13 10 4 100 5 2 = 253 v 000 900 901 loo s e in box capacitance (numerically) multiplier (nf) f 177 3 x xx 2 xxx tape on reel taped in ammopack type voltage (v ac ) packaging
f1773-2000 www.vishay.com vishay roederstein revision: 16-jul-12 3 document number: 26507 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? for detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 or end of catalog (1) spq = standard packing quantity (2) these capacitors can be delivered on continuous tape and reel; the orderi ng code is f1773...2900 ta ped on reel, f1773...2901 ta ped ammopack electrical data and ordering code u rac (v) cap. (f) tolerance (%) pitch (mm) dimensions d x l (mm) mass (g) spq (1) (pieces) orderin g code (2) 253 d t = 0.70 mm 0.07 mm 0.010 20 22.5 6.0 x 19.0 0.9 1500 f17733102000 0.012 20 22.5 6.0 x 19.0 0.9 1500 f17733122000 0.015 20 22.5 6.0 x 19.0 0.9 1500 f17733152000 0.018 20 22.5 6.0 x 19.0 0.9 1500 f17733182000 0.022 20 22.5 6.0 x 19.0 0.9 1500 f17733222000 0.027 20 22.5 6.0 x 19.0 0.9 1500 f17733272000 0.033 20 22.5 6.0 x 19.0 0.9 1500 f17733332000 0.039 20 22.5 6.5 x 19.0 1.0 1500 f17733392000 0.047 20 22.5 7.0 x 19.0 1.1 1500 f17733472000 d t = 0.80 mm 0.08 mm 0.056 20 22.5 8.0 x 19.0 1.6 1500 f17733562000 0.068 20 22.5 8.0 x 19.0 1.6 1500 f17733682000 0.082 20 22.5 9.0 x 19.0 1.8 1500 f17733822000 0.10 20 22.5 9.5 x 19.0 2.0 1000 f17734102000 0.12 10 22.5 10.5 x 19.0 2.2 1000 f17734122000 0.15 10 30.0 8.5 x 26.5 2.2 1000 f17734152000 0.18 10 30.0 9.5 x 26.5 2.6 1000 f17734182000 0.22 10 30.0 10.0 x 26.5 2.8 1000 f17734222000 0.27 10 30.0 11.0 x 26.5 3.3 750 f17734272000 0.33 10 30.0 12.0 x 26.5 3.8 750 f17734332000 0.39 10 30.0 13.0 x 26.5 4.7 750 f17734392000 0.47 10 30.0 14.0 x 26.5 5.5 1250 f17734472000 0.56 10 35.0 14.0 x 31.5 6.2 1000 f17734562000 0.68 10 35.0 15.0 x 31.5 6.7 1000 f17734682000 d t = 1.0 mm 0.1 mm 0.82 10 35.0 16.5 x 31.5 8.3 750 f17734822000 1.0 10 35.0 18.0 x 31.5 9.5 750 f17735102000 1.2 10 35.0 19.5 x 31.5 11.0 500 f17735122000 1.5 10 45.0 18.0 x 41.5 13.5 500 f17735152000 1.8 10 45.0 19.5 x 41.5 15.7 450 f17735182000 2.2 10 45.0 21.5 x 41.5 17.8 400 f17735222000
f1773-2000 www.vishay.com vishay roederstein revision: 16-jul-12 4 document number: 26507 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mounting normal use the capacitors are designed for mounting on printed-circuit bo ards. the capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. for detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 or end of catalog specific method of mounting to withstand vibration and shock in order to withstand vibra tion and shock tests, it must be ensured that capacitor body is in good contact with the printed-cir cuit board: ? for l ? 19 mm capacitors shall be me chanically fixed by the leads ? for larger pitches the capacitors shall be mo unted in the same way and the body clamped ? the maximum diameter and length of the capac itors are specified in the dimensions table ? eccentricity as shown in the drawing below: soldering conditions for general soldering conditions and wave solder ing profile, we refer to the application note: soldering g uidelines for film capacitors: www.vishay.com/doc?28171 storage temperature ? storage temperature: t stg = - 25 c to + 35 c with rh maximum 75 % without condensation. ratings and characteristi cs reference conditions unless otherwise specified, all electrical values apply to an ambient temperature of 23 c 1 c, an atmospheric pressure of 86 kpa to 106 kpa and a relative humidity of 50 % 2 %. for reference testing, a conditio ning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. approvals safety approvals x2 volta g e value file numbers en 60384-14 (enec) (= iec 60384-14 ed-3) 253 v ac 0.01 f to 2.2 f x2 40005089 ul1283 250 v ac 0.01 f to 2.2 f x e 76297 csa 253 v ac 0.01 f to 1.0 f x2 1913342 cb test-certificate 253 v ac 0.01 f to 2.2 f x2 de 1-7470 the enec-approval together with the cb-certi ficate replace all national marks of the following countries (they have already sig ned the enec-agreement): austria; belgiu m; czech republic; denmark; finland; france; germ any; greece; hungary; ireland; italy; luxembou rg; netherlands; norway; portugal; slovenian; spain; sweden; switzerland and united kingdom. 1 mm
f1773-2000 www.vishay.com vishay roederstein revision: 16-jul-12 5 document number: 26507 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 characteristics capacitance as a function of ambient temperature (typical curve) tangent of loss angle as a function of frequency (typical curve) max. rms voltage as a function of frequency impedance as a func tion of frequency (typical curve) resonant frequency as a function of capacitance (typical curve) max. rms current as a function of frequency - 60 - 20 20 c/c (%) 2 - 2 - 4 - 6 0 60 100 t amb (c) 4 6 min. max. 1 khz typical dissipation factor (x 10 -4 ) 10 1 10 2 10 3 f (hz) 10 2 10 3 10 4 10 5 3 2 1 c 0.33 f (curve 1) 0.33 f < c 1.2 f (curve 2) 1.2 f < c 2.2 f (curve 3) t amb 100 c ac voltage (v) 10 1 10 2 10 3 f (hz) 10 2 10 1 10 3 10 4 10 5 10 -1 10 2 10 1 10 0 10 3 f (mhz) 0.01 0.1 1 10 100 1 f 0.68 f 0.47 f 0.33 f 0.22 f 0.15 f 0.1 f 0.068 f 0.047 f 0.033 f 0.022 f 0.015 f 0.01 f impedance (z) as a function of frequency (f) at t a = 20 c (average) measurement with length 6 mm z ( ) 10 1 10 2 10 3 10 4 c (nf) f (mhz) 10 -1 10 0 10 1 10 2 x2 c (nf) ac current (ma) t amb 110 c 2200 nf 10 1 10 2 10 3 10 4 10 5 10 -1 10 0 10 1 10 2 10 3 10 4 1000 nf 470 nf 100 nf 47 nf 10 nf
f1773-2000 www.vishay.com vishay roederstein revision: 16-jul-12 6 document number: 26507 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 insulation resistance as a function of ambient temperature (typical curve) application notes and limiting conditions ? for x2 electromagnetic interfer ence suppression where a higher stabililty grade is needed for continuous across the line applications (50 hz/60 hz) with a maxi mum mains voltage of 253 v ac . ? these capacitors are not intended for continuous pulse application. for these situations capacitors of the ac and pulse programs must be used. ? for series impedance applications we refer to application note: www.vishay.com/doc?28153 ? the maximum ambient temperatu re must not exceed 100 c. ? rated voltage pulse slope: if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 350 v dc and divided by the applied voltage. inspection requirements g eneral notes sub-clause numbers of tests an d performance requirements refe r to the sectional specification, publication iec 60384-14 ed-3 and specific reference data. group c inspection requirements sub-clause number and test cond itions performance requirements sub- g roup c1a part of sample of sub- g roup c1 4.1 dimensions (detail) as specified in chapters general data of this specification initial measurements capacitance tangent of loss angle: for c ? 1 f at 10 khz or for c > 1 f at 1 khz 4.3 robustness of terminatio ns tensile: load 10 n; 10 s bending: load 5 n; 4 x 90 no visible damage 4.4 resistance to sold ering heat no pre-drying method: 1a solder bath: 280 c 5 c duration: 10 s t amb (c) 10 5 10 4 10 2 10 3 - 50 0 50 100 rc (s)
f1773-2000 www.vishay.com vishay roederstein revision: 16-jul-12 7 document number: 26507 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub- g roup c1a part of sample of sub- g roup c1 4.19 component solvent resistance isopropylalcohol at room temperature method: 2 immersion time: 5 min 0.5 min recovery time: min. 1 h, max. 2 h 4.4.2 final measurements visual examination no visible damage legible marking capacitance | ? c/c| ? 5 % of the value measured initially tangent of loss angle increase of tan ? : ? 0.008 for: c ? 1 f or ? 0.005 for: c > 1 f compared to values measured initially insulation resistance as specified in section insulation resistance of this specification sub- g roup c1b part of sample of sub- g roup c1 initial measurements capacitance tangent of loss angle: for c ? 1 f at 10 khz or for c > 1 f at 1 khz 4.20 solvent resistance of the marking isopropylalcohol at room temperature method: 1 rubbing material: co tton wool immersion time: 5 min 0.5 min no visible damage legible marking 4.6 rapid change of temperature ? a = - 40 c ? b = + 100 c 5 cycles duration t = 30 min 4.6.1 inspection visual examination no visible damage 4.7 vibration mounting: see se ction mounting of this specification procedure b4 frequency range: 10 hz to 55 hz amplitude: 0.75 mm or acceleration 98 m/s2 (whichever is less severe) total duration 6 h 4.7.2 final inspection visual examination no visible damage 4.9 shock mounting: see sect ion mounting for more information pulse shape: half sine accelerati on: 490 m/s2 duration of pulse: 11 ms 4.9.2 final measurements visual examination no visible damage capacitance | ? c/c| ? 5 % of the value measured initially tangent of loss angle increase of tan ? : ? 0.008 for: c ? 1 f or ? 0.005 for: c > 1 f compared to values measured initially insulation resistance as specified in section insulation resistance of this specification group c inspection requirements sub-clause number and test cond itions performance requirements
f1773-2000 www.vishay.com vishay roederstein revision: 16-jul-12 8 document number: 26507 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub- g roup c1 combined sample of specimens of sub- g roups c1a and c1b 4.11 climatic sequence 4.11.1 initial measur ements capacitance measured in 4.4.2 and 4.9.2 tangent of loss angle: measured initially in c1a and c1b 4.11.2 dry heat temperature: 100 c duration: 16 h 4.11.3 damp heat cyclic test db first cycle 4.11.4 cold temperature: - 40 c duration: 2 h 4.11.5 damp heat cyclic test db remaining cycles 4.11.6 final measurements visual examination no visible damage legible marking capacitance | ? c/c| ? 5 % of the value measured in 4.11.1. tangent of loss angle increase of tan ? : ? 0.008 for: c ? 1 f or ? 0.005 for: c > 1 f compared to values measured in 4.11.1. voltage proof 1200 v dc ; 1 min between terminations no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section insulation resistance of this specification sub- g roup c2 4.12 damp heat steady state 21 days; 40 c; 90 % to 95 % rh no load 4.12.1 initial measur ements capacitance tangent of loss angle: for c ? 1 f at 10 khz or for c > 1 f at 1 khz 4.12.3 final measurements visual examination no visible damage legible marking capacitance | ? c/c| ? 5 % of the value measured in 4.12.1. tangent of loss angle increase of tan ? : ? 0.008 for: c ? 1 f or ? 0.005 for: c > 1 f compared to values measured in 4.12.1. voltage proof 1200 v dc ; 1 min betwee n terminations no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section insulation resistance of this specification group c inspection requirements sub-clause number and test cond itions performance requirements
f1773-2000 www.vishay.com vishay roederstein revision: 16-jul-12 9 document number: 26507 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub- g roup c3 4.13.1 initial measur ements capacitance tangent of loss angle: for c ? 1 f at 10 khz or for c > 1 f at 1 khz 4.13 impulse voltage 3 successive impulses, full wave, peak voltage: x2: 2.5 kv for c ? 1 f x2: 2.5 kv/ ? c for c > 1 f max. 24 pulses no self healing brea kdowns or flash-over 4.14 endurance duration: 1000 h 1.25 x u rac at 100 c for c ? 1 f 1.25 x u rac at 85 c for c > 1 f once in every hour the voltage is increased to 1000 v rms for 0.1 s via resistor of 47 ? 5 % 4.14.7 final measurements visual examination no visible damage legible marking capacitance | ? c/c| ? 10 % compared to values measured in 4.13.1. tangent of loss angle increase of tan ? : ? 0.008 for: c ? 1 f or ? 0.005 for: c > 1 f compared to values measured in 4.13.1. voltage proof 1200 v dc ; 1 min betwee n terminations 2000 v ac ; 1 min between terminations and case no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section insulation resistance of this specification sub- g roup c4 4.15 charge and disc harge 10 000 cycles charged to 350 v dc discharge resistance: 4.15.1 initial measur ements capacitance tangent of loss angle: for c ? 1 f at 10 khz or for c > 1 f at 1 khz 4.15.3 final measur ements capacitance | ? c/c| ? 10 % compared to values measured in 4.15.1. tangent of loss angle increase of tan ? : ? 0.008 for: c ? 1 f or ? 0.005 for: c > 1 f compared to values measured in 4.15.1. insulation resistance ? 50 % of values specified in section insulation resistance of this specification group c inspection requirements sub-clause number and test cond itions performance requirements r 350 v dc 2 x c (du/dt) --------------------------------- - =
f1773-2000 www.vishay.com vishay roederstein revision: 16-jul-12 10 document number: 26507 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub- g roup c5 4.16 radio frequency characteristic resonance frequency ? 0.9 times the value as specified in section resonant frequency of this specification sub- g roup c6 4.17 passive flammability class c bore of gas jet: ? 0.5 mm fuel: butane test duration for actual volume v in mm 3 : v ? 250: 5 s 250 < v ? 500: 10 s 500 < v ? 1750: 20 s v > 1750: 30 s one flame application after removing test flam e from capacitor, the capacitor must not contin ue to burn for more than 30 s. no burning particle must drop from the sample. sub- g roup c7 4.18 active flammability 20 cycles of 2.5 kv discharges on the test capacitor connected to u rac the cheese cloth around the capacitors shall not burn with a flame. no electrical measurements are required. group c inspection requirements sub-clause number and test cond itions performance requirements 45.0 ~ 8 mm 12 mm
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.

▲Up To Search▲

Price & Availability of VISHAYROEDERSTEIN-F17734152004

	To Download VISHAYROEDERSTEIN-F17734152004 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .